Basket Strainer:
Aquila offers Basket type strainers for variety of installations and conditions and designed for straining and filtering of wide variety of fluids.
As unfiltered liquid enters the strainer will directly passes through basket in which almost all impurities trapped into the basket and only clean liquid will pass through the outlet of strainer. Advanced dynamic flow and large filtration area elements ensure low pressure drops and reduce maintenance period. Also it is designed such that it will not allow any bypassing of the liquid without filtration as basket is prevented by “ O “ Ring seal between basket flange and strainer internal flange. as well as retain position of basket even in case of reverse flow.
Basket strainers are normally installed before the measuring devices like Positive displacement meter or turbine meter which increases accuracy of the measuring devices.
We offer basket type strainers from 1” to 24” size with flow range up to 900 m3/hr or more & for pressure range up to 100 bar & design as per ASME Section VIII div I latest edition.
Basket Strainer cum Air Eliminator:
Aquila offers strainer cum Air Eliminator for variety of installations and conditions, designed for straining and filtering, elimination of air /vapour from variety of fluids.
As unfiltered liquid enters the strainer cum air eliminator will directly passes through basket in which almost all impurities trapped into the basket and air and vapour travel on the top of the equipment and and only clean liquid without air or vapour content will pass through the outlet of strainer cum air eliminator. Advanced dynamic flow and large filtration area elements ensure low pressure drops and reduce maintenance period. Also it is designed such that it will not allow any bypassing of the liquid without filtration as basket is prevented by “ O “ Ring seal between basket flange and strainer internal flange. as well as retain position of basket even in case of reverse flow.
This is combination of filtration and elimination space will be reduced which is most common considerable factor for design of Tank Truck Gantry and Tank Wagon Gantry.
Strainer Cum Air Eliminators are normally installed before the measuring devices like Positive displacement meter or turbine meter or Mass Flow Meter which increases accuracy of the measuring devices.
It is used when major part of air is eliminated by header Air Eliminator near storage tank / pump house and very few amount of air / vapour is to be released during tank / wagon loading.
We offer Strainer Cum Air Eliminators from 1” to 24” size with flow range up to 1800 m3/hr (30000 LPM) for pressure range up to 100 bar & design as per ASME Section VIII div I latest edition. We also offer duplex and jacketed type Strainer cum Air Eliminators.
Air Eliminator:
Aquila offers Air Eliminators for variety of installations and conditions and designed for separation, Elimination of air from the Liquid. without allowing the contained liquid to escape.
Positive Displacement meter, is a volumetric measuring device can not differentiate between liquid, air and vapor. So when liquid enters with air or vapor into this measuring devices it will contribute the measurable error.
Large amount of free air or vapor entrapped in the piping system, not only compromising meter accuracy but also lead to over speeding of meter and also creating excessive wear or unit failure.
To ensure accurate liquid Measurement, it is necessary to remove all air from the system before entering into the measuring devices.
Hence Air Eliminator is installed before the meter for accuracy of the measurement devices. We also offers Split type Air Eliminators for fuels like Aviation Turbine Fuel where frequent clearing is required.
We offer Air Eliminators from 25 ltrs to 6000 ltrs with size of 1.5″ to 24″ with 150# to 600# with design as per ASME Section VIII div I.
Optical Air Eliminator:
Aquila offers Optical Air Eliminators for mainly loading and unloading application. This optical air eliminator is mainly used where during low flow or flow with high air is present in flow condition, and when immediate flow needs to stop.
Optical air eliminator works on principal of liquid level sense. This air eliminator is installed with optical sensor at different elevation in the air eliminator to sense the liquid level. When liquid level rises up to optical sensor level it instantly signal to the batch controller unit to start loading or unloading application. When loading/unloading application is about to complete there is chances on air with low flow with liquid which enters into the air eliminator and when liquid level go below optical sensor it signals batch controller unit to close the loading and unloading application.
Prover Tank:
Aquila offers Prover tank of capacity 50 ltrs to 5000 ltrs with different of material of construction and designed as per IS – 2341 code under the certification of weights and measures.
We offer stationary as well as mobile prover tanks for use in checking commercial bulk measures, vehicle tanks, bulk meters etc. these are all made with same accuracy and quality as the smaller test measures. This provers are easy to use, reliable, and low cost way to measure the output accuracy of liquid metering equipment.
For oil companies it is necessary to concern fairness and accuracy when liquids are sold, so after necessary time frame it is required to calibrate measuring devices. Hence this prover tanks are portable in nature and prove the accuracy of measuring devices on site.
Additive Dosing Skid:
Aquila offers Additive dosing system is a very flexible System for the continuous and fully automatic dosing of additives into the main product line.
We offer different dosing skid depending on the number of Loading points for different process parameters. with this in line dosing system mixed products can be produced automatically and economically.
It mainly consists of additive storage tank, metering pump with flameproof motor, strainer, pulsation dampener, pressure gauge, non return valve, ball valve, back pressure valve to maintain the dosing pressure , base skid etc. product loading pump can be supplied along with the additive dosing skid (manual or pneumatically operated).
Along with this skid we also provide complete wiring with electrical control panel for operation and selection pump which can be integrated with batch controller unit or PLC.
The additive system can also be used for fuel colouring like Blue dye and marker dosing system. We offer additive dosing skid for MS, HSD, SKO.
Additive Injection Panel:
Aquila offers Additive injection panel is widely used for injecting additives into main product line (HSD, MS, SKO). This additive injection panel is installed mainly at distribution facilities.
It is very accurate in nature with low pressure drop.
It mainly consists of additive oval gear meter, solenoid valve, strainer, check valves, needle valves and completely mounted on stainless steel / Aluminum panel.
Areas of Applications:
- A petroleum
- B oil
- C chemicals
- D fuels
- E ink
- F Dye
Liquid Metering Skid:
Aquila manufacture complete skid for liquid and gas for measurement, control and filtration. this skids are fabricated with latest codes and international standard. metering system is manufactured for crude oil and hydrocarbon products such as LPG, Fuel Oil, Motor Spirit, Diesel, Kerosene.
Aquila normally manufacture skids as per general arrangement drawings, P & ID provided by contractor who is overall system integrator. we design and detail piping, skid, platform static equipments as per clients datasheet. Major capital items like flow meter, Batch controller, PLC, instruments are free issued by clients or can be purchased and integrate by us with due consultation with client.
We have wide range of approved WPS, PQR AND WPQ as per ASME SEC IX for different grade and class of materials and welding process of SMAW, GTAW, MIG. if required we can qualify WPQRs as per custom clients requirement as and when required.